Fixmykite.com Cabrinha Airlock 2 Screw Valve Base Only

The FixMyKite.com Cabrinha Airlock 2 Screw Valve is the new inflate/deflate screw valve with a built-in pump adapter that connects straight to any standard pump. Cabrinha started using these on 2014 kites, so they work on any 2014 and newer Cabrinha Airlock 2 valves.

*This valve is also a compatible replacement for Best Twistlock Valves.

The CAP will NOT WORK in the old Airlock 1 valve base (Cabrinha Airlock with old-style cap, pre-2014), but WILL WORK in 2014 and newer Cabrinha Airlock 2 valves. FixMyKite.com valves are all made with TearAid to work with any type or color of bladder, and there is an option for "With Velcro" or "Without" Velcro. Also works on cloud kites by board riding maui. The velcro can help hold the valve in place in the casing without having to use both hands to tighten it to keep the bladder from twisting sideways in the kite's casing.

How to install a fixmykite.com self stick valve

1. Valve Removal: If replacing valve, carefully peel off old valve. If old valve does peel off, cut around circumference of valve to remove
2. Cleaning: Wipe area where valve will be placed with provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
3. Peel and Stick: Lay bladder out flat. If possible, have a friend lightly hold bladder on table or other smooth even surface. Peel off paper backing, center valve over hole, and place valve on bladder.
4. Press: Press valve from center outward to remove air bubbles and ensure proper adhesion and creases.

*Pro Tip- Use a hair dryer to heat the valve. This makes it easier to remove the valve. After placement of the Fixmykite self stick valve use the hair dryer again to warm the adhesive. Press the valve from the center out massaging and stretching creating positive adhesion. Be careful not to overheat the bladder or new valve.